Career after M Tech Aerodynamics
Career after M.Tech Aerodynamics: There are ample of career opportunities in aviation, aerodynamics and related job positions.
- Design of Aircraft
- Test and inspection
- Fixing of problems
Failure Analysis Engineer
Career After M Tech Aerodynamics : Job Prospects
Aerodynamic engineers engage in tasks and responsibilities in designing, constructing, and testing aircraft, missiles, and spacecraft. It may include basic and applied research to evaluate adaptability of materials and equipment to aircraft design and manufacture. After the testing of the equipments, improvements / changes may be recommended.
M.Tech in Aerodynamics – Common Career after M Tech
Design engineers specialized in aerodynamics has to ensure that the aircraft, missile, car, boat etc moves easily through the air and water. The responsibility of an aerodynamics engineer is to build a model for designing and testing. They need to have enough knowledge about wind or water tunnel. This way the aerodynamics engineer can observe and measure the behaviour of air or water movement. In the career after M.Tech Aerodynamics, the engineer is expected to know the build the model using the computer and technology. This kind of specialization of aerodynamics is called a computational fluid simulation. A bright career after M.Tech Aerodynamics keeps you moving and is full of challenges as aviation industry is expanding explosively.
Aircraft Conversion Specialist: Career after M.tech as an aircraft conversion specialist has enough opportunities. An aerodynamics engineering will have knowledge on conversion of aircrafts. Conversion or remodelling is just a set of improvements in a regular private plane – better instruments for efficiency or adding a satellite positioning system. An aerodynamics engineer can also rebuild and redesign an old military or cargo plane into a fancy executive aircraft! After an M.Tech Aerodynamics specialisation, engineer is expected to have a solid understanding of aviation principles and components.
Design Engineer: Designing any aircraft or a space vehicle has job prospects in career after M.Tech Aerodynamics The common aircrafts boeing 757 and 767 may use the same basic design and components. But the 767 is a much larger aircraft with much more capacity to hold more passengers. The length, width and the capacity of the aircraft is decided by the design engineer. Position of the wings, strength of the materials etc. also is decided by the aerodynamics engineering specialist. The aerodynamics engineer calculates how the insides of the airplane and wing should be built to carry the predicted loads.
Failure Analysis Engineer: After M.Tech Aerodynamics, you may end up with a challenging career – analysis of the aircraft crash or failure. It is basically to analyze the wreckage. In the career after M.Tech in Aerodynamics, you have to be an expert in a specific area, like structures, propulsion, or control systems, or perhaps know a lot about the overall aircraft. The failure can be a simple system malfunction or a catastrophic failure like a crash. The failure analysis engineer will try to recreate what happened, analyze the problem, and then recommend changes not to repeat.
M.Tech in Aerodynamics – Common Career after M Tech
Flight Operations & Performance Engineering: Airport operations and test facility is managed by the flight operations people. Their duties comprise of overseeing the flying, training, and maintenance schedules for the pilots and airplanes. When a pilot is scheduled for a check flight, they’re the ones who set it up and assign a check pilot to the flight.
Performance Engineer: An M.Tech Aerodynamics engineer can design, evaluate, prototype and built a full sized aircraft model. He is one of the team that tests and evaluates the performance of the plane and its systems. He is responsible to resolve any unforeseen problems.
Test Engineer: The test engineer is another member of the team that checks out a new aircraft. He or she works with the performance engineer, conducting studies to determine how well the craft or individual equipment is operating. If the new aircraft or system does not satisfy the original design requirements, it’s back to the drawing board! Most test engineers have at least a BS degree in science or engineering.
Weight and Balance Engineer: Most people don’t realize that when they and their luggage get on the plane, a weight and balance engineer has already determined where they should sit and where their bags should be placed to make sure that the plane is properly balanced. This may not seem very important to you, but the pilot and the design team think it is. The plane may not fly well or may break if it isn’t balanced right! Think about it – have you ever tried to float a boat in water, but you put all the weight on one side of the boat? It probably sank, didn’t it? So, the weight and balance engineer studies the loads on a plane or a missile, and he or she works with the other design engineers to ensure that the balance points on the plane or missile coordinate with the controls and structural systems. Then the plane or missile will perform as designed! These engineers usually have BS degrees in civil, mechanical, or aerospace engineering.
Career after M Tech Aerodynamics – Expected Skills
Rigorous allround training in Aerospace Engineering degree from IIT Kanpur prepares you to be able to demonstrate a variety of transferable skills that apply to a range of situations related to aerospace as well as allied disciplines. This is achieved through a wide range of classroom lectures, laboratory work with state-of-the-art equipments, real flight testing experience in our own flight laboratory and participation in cutting edge research.
Aerospace engineering is a high-technology discipline more than 110 years old. Aerodynamics is a part of Aerospace Engineering. Yet, much remains to be done to broaden its scope and application to develop next generation Hypersonic Aircrafts, fast whisper-quite Helicopters, reusable Spacecrafts and Launch Vehicles etc. As a result aerospace engineering is an ever evolving discipline full of exciting opportunities and challenges to keep one excited and engaged in its pursuit for ever. With several private players entering the Aerospace industry in India, the opportunities for an Aerospace engineer are only getting better and better.
What opportunities do I have post graduation?
Graduates from the department typically have the following options
- Campus placement (India and abroad)
- Higher studies (India and abroad)
- Self employment (entrepreneurship and incubation opportunities within campus)
Campus attracts various reputed national (both public and pvt.) and multinational companies who love to hire our graduates. Department boasts of a long list of Alumni holding various prestigious positions in academia and industry.
Do I get a job with high salary for a career in M Tech Aerodynamics?
This is most common question that bothers graduates. Generally most students performing academically well during the programme end up with a good career after M.Tech. But this should be the least the concern since you choose to be sincere and perform to your true capability, nobody can stop you from achieving goals in your career after M.Tech Aerodynamics, you set your eyes on.
In career after M.Tech Aerospace Engineering, graduates are equipped to undertake challenging work in the Aerospace Engineering Industry, on crucial aspects like propulsion systems, aerodynamic design, structural systems, precision manufacturing, etc. Most of them would join the Indian Space Research Organization (ISRO) and contribute to the national space programme. They could also take up jobs outside ISRO, in entities like HAL, DRDOs, and ancillary industries related to the Aerospace sector. Having undergone most courses a Mechanical Engineering graduate would, they can also take up jobs in the automotive sector, Power sector, Manufacturing sector, R&D organizations, etc.